Set Up Traffic Control; Manage Mac Filtering - NETGEAR GS418TPP User Manual

8-Port or 16-Port Gigabit Smart Managed Pro Switch Model GS418TPP, GS510TLP, and GS510TPP
The following table describes the fields on the Client Summary page.
Table 80. Client Summary information
Field
Port
User Name
Supplicant Mac Address
Session Time
Filter ID
VLAN ID
VLAN Assigned
Session Timeout
Termination Action

Set up traffic control

You can configure MAC filters, storm control, port security, protected ports, and private VLAN
settings.

Manage MAC filtering

You can create MAC filters that limit the traffic allowed into and out of specified ports on the
switch.
Create a MAC filter
To create a MAC filter:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the default IP address of
the switch on page 13.
The login window opens.
4. Enter the switch's password in the Password field.
Manage Device Security
Description
The port to be displayed.
The user name representing the identity of the supplicant device.
The supplicant's device MAC address.
The time since the supplicant logged in seconds.
The policy filter ID assigned by the authenticator to the supplicant device.
The VLAN ID assigned by the authenticator to the supplicant device.
The reason for the VLAN ID assigned by the authenticator to the supplicant device.
The session time-out imposed by the RADIUS server on the supplicant device.
The termination action imposed by the RADIUS server on the supplicant device.
329 User Manual