Siemens SINUMERIK 840D sl Function Manual page 489

05.08
© Siemens AG 2008 All Rights Reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 05.2008 Edition
10.2 NCK safety alarms for SINUMERIK 840D sl
212
Cam track assignment: The setting in MD 36938
$MA_SAFE_CAM_TRACK_ASSIGN[17] does not correspond with the
associated drive parameter assignment.
Remedy
Cam track assignment SN18. Enter the same MDs and check the cam
enable and cam parameterization
213
Cam track assignment: The setting in MD 36938
$MA_SAFE_CAM_TRACK_ASSIGN[18] does not correspond with the
associated drive parameter assignment.
Remedy
Cam track assignment SN19. Enter the same MDs and check the cam
enable and cam parameterization
214
Cam track assignment: The setting in MD 36938
$MA_SAFE_CAM_TRACK_ASSIGN[19] does not correspond with the
associated drive parameter assignment.
Remedy
Cam track assignment SN20. Enter the same MDs and check the cam
enable and cam parameterization
215
Cam track assignment: The setting in MD 36938
$MA_SAFE_CAM_TRACK_ASSIGN[20] does not correspond with the
associated drive parameter assignment.
Remedy
Cam track assignment SN21. Enter the same MDs and check the cam
enable and cam parameterization
216
Cam track assignment: The setting in MD 36938
$MA_SAFE_CAM_TRACK_ASSIGN[21] does not correspond with the
associated drive parameter assignment.
Remedy
Cam track assignment SN22. Enter the same MDs and check the cam
enable and cam parameterization
217
Cam track assignment: The setting in MD 36938
$MA_SAFE_CAM_TRACK_ASSIGN[22] does not correspond with the
associated drive parameter assignment.
Remedy
Cam track assignment SN23. Enter the same MDs and check the cam
enable and cam parameterization
218
Cam track assignment: The setting in MD 36938
$MA_SAFE_CAM_TRACK_ASSIGN[23] does not correspond with the
associated drive parameter assignment.
Remedy
Cam track assignment SN24. Enter the same MDs and check the cam
enable and cam parameterization
Diagnostics
10-489