Siemens SINUMERIK 840D sl Function Manual page 343

05.08
r9727 SI motion, internal drive user agreement
Displays the internal status of the user agreement
Value = 0: User agreement is not set
Value = AC hex: User agreement is set
Unit: Default value:
– –
r9728[0...1] SI motion, actual checksum, SI parameters
Displays the checksum over the checked Safety Integrated parameters of the
motion monitoring functions (actual checksum).
[0]: Checksum over SI parameters for motion monitoring
[1]: Checksum over SI parameters for actual values
Unit: Default value:
– –
See also: F01680 "SI motion: Checksum error safe monitoring functions".
r9729[0...1] SI motion, reference checksum, SI parameters
Sets the checksum over the checked Safety Integrated parameters of the mo-
tion monitoring functions (reference checksum).
[0]: Checksum over SI parameters for motion monitoring
[1]: Checksum over SI parameters for actual values
See also: r9728
Unit: Default value:
– 0000 hex
See also: F01680 "SI motion: Checksum error safe monitoring functions".
© Siemens AG 2008 All Rights Reserved
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 05.2008 Edition
Minimum value: Maximum value:
– –
Minimum value: Maximum value:
– –
Minimum value: Maximum value:
0000 hex 0xFFFF FFFF
Data Description
8.2 Parameters for SINAMICS S120
Checksum:
No
Data type:
Integer16
Checksum:
No
Data type:
Unsigned32
Checksum:
No
Data type:
Unsigned32
Protection level:
4
Effective:
Protection level:
3
Effective:
Protection level:
3
Effective:
POWER ON
8-343