Siemens SINUMERIK 840D sl Function Manual page 444

Diagnostics
10.1 Troubleshooting procedure
Value range of the transfer parameter
000
Parameterizing error detected when booting (different state active)
Crosswise data comparison error, SPL protective mechanism: MD 11500 –
DB18.DBX36.0
Crosswise data comparison error, stop response for SPL error: MD 10097 –
DB18.DBX36.1
001...064
Error in system variables $A_INSE(P)[01...64] (Alarm 27090/Alarm 27254)
The index value then results from a channel error signaled from the PROFIsafe
module
(Alarm 27254), that is assigned the appropriate $A_INSE(P) variable (e.g. discrep-
ancy error)
065...128
Error in the system variables $A_OUTSE(P)[01...64] (Alarm 27090/Alarm 27254).
This means, Alarm 27090 signals an internal logic error ($A_OUTSE(P) variables
differ) and Alarm 27254 signals a channel error signaled from the PROFIsafe mod-
ule that is assigned to the appropriate $A_OUTSE(P) variable (e.g. short–circuit
fault).
129...192
Error in system variables $A_INSI(P)[01...64] (only alarm 27090)
193...256
Error in system variables $A_OUTSI(P)[01...64] (only alarm 27090)
257...320
Error in system variables $A_MARKERSI(P)[01...64] (only alarm 27090)
Definition of the extended text
The file, in which the extended texts are defined, is also declared in the configura-
tion file for the alarm server (file MBDDE.INI) in the section [IndexTextFiles].
File excerpt: mbdde.ini
[IndexTextfiles]
ALSI=f:\dh\mb.dir\alsi_
We recommend that this file for the extended text is located in the HMI user directory.
Every parameter can be assigned a dedicated text in this file, whereby the text
entry is located in front of the associated parameter value (refer to the following file
excerpt).
File excerpt: alsi_gr.com
000000 0 0
000001 0 0
..
10-444
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 05.2008 Edition
; Example : Standard entry
"Parameterizing error MD11500/DB18.DBX36.0 or
MD10097/DB18.DBX36.1"
"User text $A_INSE(P)[01]"
© Siemens AG 2008 All Rights Reserved
05.08