Service Displays - Siemens SINUMERIK 840D sl Function Manual

Diagnostics
10.1 Troubleshooting procedure
10.1.1

Service displays

S Upon activation of the "Service SI" softkey, the following information blocks
about SI–related data are displayed on the HMI for the selected axis:
– Status SI (selected per default)
– SI configuration
– Cam SGA
– SGE/SGA
– SPL
Status SI
Fig. 10-1
The axis+, axis– vertical softkeys or direct selection are used to set the desired
axis. The current axis is displayed in the top right half of the table.
Various states for both channels are displayed separately in the diagnostics
screen.
10-436
SINUMERIK 840D sl/SINAMICS S120 SINUMERIK Safety Integrated (FBSI sl) – 05.2008 Edition
Status SI
© Siemens AG 2008 All Rights Reserved
05.08