Rear Brake Disc Removal - APRILIA TUAREG 660 Service Station Manual

Braking system
•
Position the front brake calliper com-
plete with support on the fork stanchion
and fasten it by tightening the two fixing
screws to the prescribed torque.
•
Suitably protect the rim to prevent it
from coming into contact with the brake
fluid when connecting the brake line.
•
Insert the special screw complete with
new washers fixing the brake line and
tighten it to the prescribed torque.
WARNING
PAY ATTENTION WHEN CONNECTING THE BRAKE LINES
ON THE RIGHT CALLIPER. THE BRAKE LINE (1) THAT
CONNECTS THE TWO CALLIPERS MUST BE INSERTED
FIRST AND THEN THE LINE (2) THAT CONNECTS THE
RIGHT CALLIPER TO THE MODULATOR.
•
Fill the front brake system, and check the level.
Rear brake disc
BRAK SYS - 244
TUAREG 660