Upper Steering Yoke Removal - APRILIA TUAREG 660 Service Station Manual

TUAREG 660
•
Remove the supports positioned under
the stanchion allowing it to lower and
tighten the cap to torque.
Upper steering yoke
Removal
To remove the upper triple clamp it is necessary
to first remove the handlebar complete with grips,
throttle control, light switches, clutch lever and
front brake master cylinder.
•
To carry out this operation, after having
unscrewed the four screws (1), remove
the U-bolt (2).
•
Adequately protect the instrument
cluster, disconnect the handlebar (3)
and place it on the front as indicated.
•
Remove the fixing bush (4) and the
washer (5).
Suspensions
SUSP - 143