Crankcase - Crankshaft - APRILIA SCARABEO 125 Service Manual

Engine
•
Refit the tappet cover.
Specific tooling
0240880 Threaded bolt for locking crankshaft at TDC
Locking torques (N*m)
Transmission gear timing fixing screw - M8x20x1 (2) 27 Nm (19.91 lbf ft) - Loctite 243

Crankcase - crankshaft

Splitting the crankcase halves
•
Before opening the crankcase, drain out all engine oil, remove the driving pulley, the starter
motor, the flywheel, the freewheel and the intermediate gear.
•
Remove the thermal group.
•
Remove the oil pump.
•
Unscrew and remove the three screws.
•
Separate the crankcase halves by giv-
ing short taps with a rubber hammer.
CAUTION
PAY ATTENTION THAT THE TOOTHING OF BOTH THE
TIMING CHAIN GEARS AND THE OIL PUMP GEARS DO
NOT DAMAGE THE BUSHING.
ENG - 116
SCARABEO 125 - 200