Vmps Retry - Cisco Catalyst 4500 Series Configuration Manual

vmps retry

vmps retry
To configure the per-server retry count for the VLAN Query Protocol (VQP) client, use the vmps retry
command. To return to the default setting, use the no form of this command.
Syntax Description
count
Command Default
The retry count is 3.
Command Modes Global configuration mode
Command History Release
12.1(13)EW
Usage Guidelines You can verify your setting by entering the show vmps command and examining information in the
Server Retry Count row.
Examples The following example shows how to set the retry count to 7:
Switch(config)# vmps retry 7
Related Commands Command
show vmps
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-1178
vmps retry count
no vmps retry
Number of attempts to contact the VLAN Membership Policy Server (VMPS) by the
client before querying the next server in the list; valid values are from 1 to 10.
Modification
This command was introduced on the Catalyst 4500 series switch.
Description
Displays the VLAN Query Protocol (VQP) version,
reconfirmation interval, retry count, VLAN Membership Policy
Server (VMPS) IP addresses, current servers, and primary
servers.
Chapter 2