Vtp Transparent - Cisco Catalyst 4500 Series Configuration Manual

vtp transparent

vtp transparent
To place a device in VTP transparent mode, use the vtp transparent command. To return to VTP server
mode, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default Disabled
Command Modes VLAN configuration mode
Command History Release
12.1(8a)EW
Usage Guidelines The vtp transparent command disables VTP from the domain but does not remove the domain from the
switch.
If the receiving switch is in transparent mode, the configuration is not changed. The switches in
transparent mode do not participate in VTP. If you make VTP or VLAN configuration changes on a
switch in transparent mode, the changes are not propagated to the other switches in the network.
The
an error if the device is not in transparent mode.
Examples
The following example shows how to place the device in VTP transparent mode:
Switch(vlan-config)# vtp transparent
Switch(vlan-config)#
The following example shows how to return the device to VTP server mode:
Switch(vlan-config)# no vtp transparent
Switch(vlan-config)#
Related Commands Command
show vtp
vtp (global configuration
mode)
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
2-1190
vtp transparent
no vtp transparent
Modification
This command was introduced on the Catalyst 4500 series switch.
vtp server command is similar to the no vtp transparent command, except that it does not return
Description
Displays VTP statistics and domain information.
Configures the name of a VTP configuration storage file.
Chapter 2