Monitor Traffic Count; Monitor Traffic Detail Count - Juniper EX9200 Features Manual

Network Management and Monitoring Feature Guide for EX9200 Switches
Required Privilege
Level
List of Sample Output
Output Fields
Sample Output

monitor traffic count

monitor traffic detail count

88
Table 6: Arithmetic and Relational Operators for the monitor traffic
Command (continued)
Arithmetic or Relational
Operator
=
!=
trace
maintenance
monitor traffic count on page 88
monitor traffic detail count on page 88
monitor traffic extensive (Absolute Sequence) on page 89
monitor traffic extensive (Relative Sequence) on page 89
monitor traffic extensive count on page 89
monitor traffic interface on page 89
monitor traffic matching on page 90
monitor traffic (TX Matrix Plus Router) on page 90
monitor traffic (QFX3500 Switch) on page 91
monitor traffic matching icmp on page 91
monitor traffic matching IP protocol number on page 92
monitor traffic matching arp on page 92
monitor traffic matching port on page 93
When you enter this command, you are provided feedback on the status of your request.
user@host> monitor traffic count 2
listening on fxp0
04:35:49.814125 In my-server.home.net.1295 > my-server.work.net.telnet: . ack
4122529478 win 16798 (DF)
04:35:49.814185
Out my-server.work.net.telnet > my-server.home.net.1295: P
1:38(37) ack 0 win 17680 (DF) [tos 0x10]
user@host> monitor traffic detail count 2
listening on fxp0
04:38:16.265864 In my-server.home.net.1295 > my-server.work.net.telnet: . ack
4122529971 win 17678 (DF) (ttl 121, id 6812)
04:38:16.265926
Out my-server.work.net.telnet.telnet > my-server.home.net.1295: P 1:38(37) ack 0
win 17680 (DF) [tos 0x10]
Description
If the compared expressions are equal, the packet matches.
If the compared expressions are unequal, the packet matches.
(ttl 6)
Copyright © 2016, Juniper Networks, Inc.