Configuring Threshold Values For Fault Events In An Action Profile; Applying An Action Profile - Juniper EX9200 Features Manual

Network Management and Monitoring Feature Guide for EX9200 Switches

Configuring Threshold Values for Fault Events in an Action Profile

Related
Documentation

Applying an Action Profile

10
You can configure link event thresholds for received error events that trigger the action
specified in the statement. You can then apply the action profile to one or more
action
interfaces.
To configure link event thresholds, include the
protocols oam ethernet link-fault-management action-profile profile-name event]
level:
link-event-rate {
frame-error count;
frame-period count;
frame-period-summary
symbol-period count;
}
link-event-rate on page 59
IEEE 802.3ah OAM Link-Fault Management Overview on page 3
Configuring IEEE 802.3ah OAM Link-Fault Management on page 5
Enabling IEEE 802.3ah OAM Support on page 6
Configuring Link Discovery on page 16
Configuring the OAM PDU Interval on page 6
Configuring the OAM PDU Threshold on page 7
Configuring Threshold Values for Local Fault Events on an Interface on page 17
Disabling the Sending of Link Event TLVs on page 18
Detecting Remote Faults on page 18
Configuring an OAM Action Profile on page 8
Specifying the Actions to Be Taken for Link-Fault Management Events on page 19
Monitoring the Loss of Link Adjacency on page 12
Monitoring Protocol Status on page 13
Applying an Action Profile on page 10
Setting a Remote Interface into Loopback Mode on page 11
Enabling Remote Loopback Support on the Local Interface on page 15
Example: Configuring IEEE 802.3ah OAM Support on an Interface on page 21
Ethernet Interfaces Feature Guide for Routing Devices
You can apply an action profile to one or more interfaces.
link-event-rate
count;
statement at the [edit
hierarchy
Copyright © 2016, Juniper Networks, Inc.