Juniper EX9200 Features Manual page 47

Purpose
Action
Meaning
Purpose
Action
Meaning
Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
Verifying That sFlow Technology Is Enabled on the Specified Interface
Verify that sFlow technology is enabled on the specified interfaces and display the
sampling parameters.
Use the show sflow interface
user@switch> show sflow interface
Interface Status
Egress Ingress
ge-0/0/0.0 Enabled Disabled
The output indicates that sFlow technology is enabled on the ge-0/0/0.0 interface with
an egress sampling rate of 1000, a disabled ingress sampling rate, and a polling interval
of 20 seconds.
Verifying the sFlow Collector Configuration
Verify the sFlow collector's configuration.
Use the
show sflow collector
show sflow collector
user@switch>
Collector Udp-port
address
10.204.32.46 5600
10.204.32.76 3400
The output displays the IP address of the collectors and the UDP ports. It also displays
the number of samples.
Configuring sFlow Technology for Network Monitoring (CLI Procedure) on page 26
Understanding How to Use sFlow Technology for Network Monitoring on an EX Series
Switch on page 23
Chapter 2: Configuring sFlow Monitoring Technology
command:
Sample rate Adapted sample rate
Egress Ingress Egress Ingress
1000 2048 1000
command:
No. of samples
1000
1000
Polling-interval
2048 20
31