Show Interfaces (10-Gigabit Ethernet) - Juniper EX9200 Features Manual

Network Management and Monitoring Feature Guide for EX9200 Switches

show interfaces (10-Gigabit Ethernet)

Syntax
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
120
show interfaces xe-fpc/pic/port
<brief | detail | extensive | terse>
<descriptions>
<media>
<snmp-index snmp-index>
<statistics>
Command introduced in Junos OS Release 8.0.
(M320, M120, MX Series, and T Series routers only) Display status information about the
specified 10-Gigabit Ethernet interface.
—Display standard information about the specified 10-Gigabit Ethernet
xe-fpc/pic/port
interface.
brief | detail | extensive | terse
—(Optional) Display interface description strings.
descriptions
media —(Optional) Display media-specific information about network interfaces.
—(Optional) Display information for the specified SNMP index
snmp-index snmp-index
of the interface.
—(Optional) Display static interface statistics.
statistics
view
show interfaces extensive (10-Gigabit Ethernet, LAN PHY Mode, IQ2) on page 135
show interfaces extensive (10-Gigabit Ethernet, WAN PHY Mode) on page 138
show interfaces extensive (10-Gigabit Ethernet, DWDM OTN PIC) on page 140
show interfaces extensive (10-Gigabit Ethernet, LAN PHY Mode, Unidirectional
Mode) on page 142
show interfaces extensive (10-Gigabit Ethernet, LAN PHY Mode, Unidirectional Mode,
Transmit-Only) on page 142
show interfaces extensive (10-Gigabit Ethernet, LAN PHY Mode, Unidirectional Mode,
Receive-Only) on page 143
See Table 9 on page 121 for the output fields for the
command.
—(Optional) Display the specified level of output.
show interfaces
Copyright © 2016, Juniper Networks, Inc.
(10–Gigabit Ethernet)