Traceroute - Juniper EX9200 Features Manual

Network Management and Monitoring Feature Guide for EX9200 Switches

traceroute

List of Syntax
Syntax
Syntax (QFX Series
and OCX Series)
Release Information
Description
Options
150
Syntax on page 150
Syntax (QFX Series and OCX Series) on page 150
traceroute host
<as-number-lookup>
<bypass-routing>
<clns>
<gateway address>
<inet | inet6>
<interface interface-name>
<logical system logical-system-name>
<monitor host>
<mpls (ldp FEC address | rsvp label-switched-path-name)>
<no-resolve>
<propagate-ttl>
<routing-instance routing-instance-name>
<source source-address>
<tos value>
<ttl value>
<wait seconds>
traceroute host
<as-number-lookup>
<bypass-routing>
<gateway address>
<inet>
<inet6>
<interface interface-name>
<monitor host>
<no-resolve>
<routing-instance routing-instance-name>
<source source-address>
<tos value>
<ttl value>
<wait seconds>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
mpls option introduced in Junos OS Release 9.2.
option introduced in Junos OS Release 12.1.
propagate-ttl
Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Support for IPv6 traceroute with
16.1.
Display the route that packets take to a specified network host. Use
debugging tool to locate points of failure in a network.
host —IP address or name of remote host.
—(Optional) Display the autonomous system (AS) number of each
as-number-lookup
intermediate hop on the path from the host to the destination.
introduced with Junos OS Release
as-number-lookup
Copyright © 2016, Juniper Networks, Inc.
as a
traceroute