Show Sflow; Table 12: Show Sflow Output Fields - Juniper EX9200 Features Manual

Network Management and Monitoring Feature Guide for EX9200 Switches

show sflow

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields

Table 12: show sflow Output Fields

Field Name
sFlow
Sample rate egress
Sample rate ingress
Sample limit
Polling interval
Agent ID
146
show sflow
<collector>
<interface>
Command introduced in Junos OS Release 9.3 for EX Series switches.
Display default sFlow technology configuration information.
—Display default sFlow technology configuration information.
none
—(Optional) Display standard status information about the specified sFlow
collector
collector.
—(Optional) Display standard status information about the specified sFlow
interface
interface.
view
show sflow interface on page 148
show sflow collector on page 145
Example: Configuring sFlow Technology to Monitor Network Traffic on EX Series
Switches on page 27
Configuring sFlow Technology for Network Monitoring (CLI Procedure) on page 26
show sflow on page 147
Table 12 on page 146 lists the output fields for the
are listed in the approximate order in which they appear.
Field Description
Status of the feature:
enabled
Rate at which egress packets are sampled.
Rate at which ingress packets are sampled.
Number of packets sampled per second. The sampling limit
cannot be configured and is set to 300 packets per second.
Interval at which the sFlow agent polls the interface.
The IP address assigned to the sFlow agent.
show sflow
or .
disabled
Copyright © 2016, Juniper Networks, Inc.
command. Output fields
Level of Output
All levels
All levels
All levels
All levels
All levels
All levels