Table 4: Match Conditions For The Monitor Traffic Command - Juniper EX9200 Features Manual

Network Management and Monitoring Feature Guide for EX9200 Switches

Table 4: Match Conditions for the monitor traffic Command

Match Type
Entity
Directional
Packet Length
84
Condition
host [address | hostname]
net address
net address mask mask
port (port-number | port-name)
dst
src
src and dst
or
src dst
less value
greater value
Description
Matches packets that contain the specified
address or hostname.
The protocol match conditions
or any of the directional match conditions can
be prepended to the match condition.
host
Matches packets with source or destination
addresses containing the specified network
address.
Matches packets containing the specified
network address and subnet mask.
Matches packets containing the specified
source or destination TCP or UDP port
number or port name.
In place of the numeric port address, you can
specify a text synonym, such as
(67), or (53) (the port numbers
dhcp domain
are also listed).
Matches packets going to the specified
destination. This match condition can be
prepended to any of the entity type match
conditions.
Matches packets from a specified source.
This match condition can be prepended to
any of the entity type match conditions.
Matches packets that contain the specified
source and destination addresses. This match
condition can be prepended to any of the
entity type match conditions.
Matches packets containing either of the
specified addresses. This match condition
can be prepended to any of the entity type
match conditions.
Matches packets shorter than or equal to the
specified value, in bytes.
Matches packets longer than or equal to the
specified value, in bytes.
Copyright © 2016, Juniper Networks, Inc.
, , or ,
arp ip rarp
bgp (179),