Juniper EX9200 Features Manual page 148

Network Management and Monitoring Feature Guide for EX9200 Switches
Table 9: show interfaces Gigabit Ethernet Output Fields (continued)
Field Name Field Description
Information about the CoS queue for the physical interface.
CoS information
CoS transmit queue
forwarding class name.
Bandwidth %
Bandwidth bps
Buffer %
Buffer usec
This value is nonzero only if the buffer size is configured in terms of time.
Priority
Limit
are
configured bandwidth, even if excess bandwidth is available. If
configured, the queue transmits beyond the configured bandwidth if
bandwidth is available.
Logical Interface
Name of the logical interface.
Logical interface
Index number of the logical interface, which reflects its initialization sequence.
Index
SNMP interface index number for the logical interface.
SNMP ifIndex
Unique number for use by Juniper Networks technical support only.
Generation
Information about the logical interface. Possible values are described in the
Flags
"Logical Interface Flags" section under Common Output Fields Description.
132
—Queue number and its associated user-configured
—Percentage of bandwidth allocated to the queue.
—Bandwidth allocated to the queue (in bps).
—Percentage of buffer space allocated to the queue.
—Amount of buffer space allocated to the queue, in microseconds.
—Queue priority: low or high
—Displayed if rate limiting is configured for the queue. Possible values
none and exact . If exact is configured, the queue transmits only up to the
.
none
Level of Output
extensive
is
All levels
detail extensive
detail extensive
detail extensive
All levels
Copyright © 2016, Juniper Networks, Inc.
none
none