Juniper EX9200 Features Manual page 167

Copyright © 2016, Juniper Networks, Inc.
—(Optional) Bypass the normal routing tables and send requests directly
bypass-routing
to a system on an attached network. If the system is not on a directly attached
network, an error is returned. Use this option to display a route to a local system
through an interface that has no route through it.
clns —(Optional) Trace the route belonging to Connectionless Network Service (CLNS).
—(Optional) Address of a router or switch through which the route
gateway address
transits.
—(Optional) Trace the route belonging to IPv4 or IPv6, respectively.
inet | inet6
—(Optional) Name of the interface over which to send packets.
interface interface-name
logical-system (all | logical-system-name)
systems or on a particular logical system.
monitor host —(Optional) Display real-time monitoring information for the specified host.
—(Optional) Perform this operation to display real-time monitoring
monitorhost
information.
monitorhost —(Optional) Perform this operation to display real-time monitoring
information.
—(Optional) Perform this operation to display real-time monitoring
monitorhost
information.
mpls (ldp FEC address | rsvp label-switched-path name)
and
ldp traceroute mpls rsvp
—(Optional) Do not attempt to determine the hostname that corresponds to
no-resolve
the IP address.
—(Optional) On the PE routing device, use this option to view locally
propagate-ttl
generated Routing Engine transit traffic. This is applicable for MPLS L3VPN traffic
only.
Use for troubleshooting, when you want to view hop-by-hop information from the
local provider router to the remote provider router, when TTL decrementing is disabled
on the core network using the
NOTE: Using
show hop-by-hop information.
routing-instance routing-instance-name
traceroute attempt.
source source-address —(Optional) Source address of the outgoing traceroute packets.
—(Optional) Perform this operation on all logical
—(Optional) See
.
no-proagate-ttl configuration statement.
propagate-ttl with traceroute
—(Optional) Name of the routing instance for the
Chapter 8: Operational Commands
traceroute mpls
on the CE router does not
151