Configuration Statements: Sflow Technology; Agent-Id - Juniper EX9200 Features Manual

CHAPTER 6
Configuration Statements: sFlow
Technology

agent-id

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
agent-id on page 69
collector on page 70
interfaces (sFlow Monitoring Technology) on page 71
polling-interval on page 72
sample-rate on page 73
source-ip on page 74
udp-port on page 74
agent-id ip4/ipv6-address;
[edit protocols sflow]
Statement introduced in Junos OS Release 10.2 for EX Series switches.
Configure the IP address to be assigned as the agent ID for the sFlow agent. By assigning
an IP address, you ensure that the IP address is not dynamic. You can specify an IPv4 or
IPv6 address.
routing-To view this statement in the configuration.
routing-control-To add this statement to the configuration.
Configuring sFlow Technology for Network Monitoring (CLI Procedure) on page 26
69