Table 14: Traceroute Output Fields - Juniper EX9200 Features Manual

Network Management and Monitoring Feature Guide for EX9200 Switches
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Sample Output
traceroute
152
—(Optional) Value to include in the IP type-of-service (ToS) field. The range of
tos value
values is through
0 255
ttl value —(Optional) Maximum time-to-live value to include in the traceroute request.
The range of values is
wait seconds —(Optional) Maximum time to wait for a response to the traceroute request.
network
traceroute monitor on page 154
traceroute on page 152
traceroute as-number-lookup host on page 153
traceroute no-resolve on page 153
traceroute propogate-ttl on page 153
traceroute (Between CE Routers, Layer 3 VPN) on page 153
traceroute (Through an MPLS LSP) on page 153
Table 14 on page 152 describes the output fields for the
fields are listed in the approximate order in which they appear.

Table 14: traceroute Output Fields

Field Name
traceroute to
hops max
byte packets
number-of-hops
router-name
address
Round trip time
user@host> traceroute santacruz
traceroute to host1.example.com (10.156.169.254), 30 hops max, 40 byte packets
1 blue23 (10.168.1.254)
2 red14 (10.168.255.250)
3 yellow (10.156.169.254)
.
through .
0 128
Field Description
IP address of the receiver.
Maximum number of hops allowed.
Size of packets being sent.
Number of hops from the source to the named router or switch.
Name of the router or switch for this hop.
Address of the router or switch for this hop.
Average round-trip time, in milliseconds (ms).
2.370 ms 2.853 ms
0.778 ms 2.937 ms
7.737 ms 89.905 ms
command. Output
traceroute
0.367 ms
0.446 ms
0.834 ms
Copyright © 2016, Juniper Networks, Inc.