Table 3: Output Control Keys For The Monitor Interface Command; Command - Juniper EX9200 Features Manual

Meaning
Copyright © 2016, Juniper Networks, Inc.
SONET statistics:
BIP-B1
BIP-B2
REI-L
BIP-B3
REI-P
Received SONET overhead:
The sample output shows the input and output packets for a particular SONET interface
( ). The information can include common interface failures, such as SONET/SDH
so-0/0/1
and T3 alarms, loopbacks detected, and increases in framing errors. For more information,
see Checklist for Tracking Error Conditions.
To control the output of the command while it is running, use the keys shown in
Table 3 on page 39.

Table 3: Output Control Keys for the monitor interface Command

Action
Display information about the next interface. The
scrolls through the physical or logical interfaces in the same order that they
are displayed by the show interfaces terse
Display information about a different interface. The command prompts you
for the name of a specific interface.
Freeze the display, halting the display of updated statistics.
Thaw the display, resuming the display of updated statistics.
Clear (zero) the current delta counters since
does not clear the accumulative counter.
Stop the

command.

monitor interface
See the for details on using match conditions with the
CLI Explorer
command.
0
0
0
0
0
F1 : 0x00 J0
monitor interface
command.
monitor interface
Chapter 4: Routine Monitoring
: 0xZ
Key
command N
I
F
T
was started. It
C
Q
monitor traffic
39