Frame-Error - Juniper EX9200 Features Manual

Network Management and Monitoring Feature Guide for EX9200 Switches

frame-error

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
54
frame-error count;
[edit protocols oam ethernet link-fault-management action-profile event
[edit protocols oam link-fault-management interface
Statement introduced in Junos OS Release 8.4.
Threshold for sending frame error events or taking the action specified in the action
profile.
A frame error is any frame error on the underlying physical layer. The threshold is reached
when the number of frame errors reaches the configured value within the window.
The window or period during which frame errors are counted is 5 seconds or multiples
of it (with a maximum value of 1 minute). This window denotes the duration as intervals
of 100 milliseconds, encoded as a 16-bit unsigned integer. This window is not configurable
in Junos OS. According to the IEEE 802.3ah standard, the default value of the frame-errors
window is 1 second. This window has a lower bound of 1 second and an upper bound of
1 minute.
—Threshold count for frame error events.
count
Range: 0 through 100
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Threshold Values for Local Fault Events on an Interface on page 17
Configuring Threshold Values for Fault Events in an Action Profile on page 10
link-event-rate],
interface-name event-thresholds]
Copyright © 2016, Juniper Networks, Inc.