Disabling The Sending Of Link Event Tlvs; Detecting Remote Faults - Juniper EX9200 Features Manual

Network Management and Monitoring Feature Guide for EX9200 Switches

Disabling the Sending of Link Event TLVs

Related
Documentation

Detecting Remote Faults

18
Example: Configuring IEEE 802.3ah OAM Support on an Interface on page 21
Ethernet Interfaces Feature Guide for Routing Devices
You can disable the sending of link event TLVs.
To disable the monitoring and sending of PDUs containing link event TLVs in periodic
PDUs, include the
no-allow-link-events
link-fault-management interface interface-name negotiation-options]
[edit protocol oam ethernet link-fault-management interface interface-name
negotiation-options]
no-allow-link-events;
no-allow-link-events on page 60
IEEE 802.3ah OAM Link-Fault Management Overview on page 3
Configuring IEEE 802.3ah OAM Link-Fault Management on page 5
Enabling IEEE 802.3ah OAM Support on page 6
Configuring Link Discovery on page 16
Configuring the OAM PDU Interval on page 6
Configuring the OAM PDU Threshold on page 7
Configuring Threshold Values for Local Fault Events on an Interface on page 17
Detecting Remote Faults on page 18
Configuring an OAM Action Profile on page 8
Specifying the Actions to Be Taken for Link-Fault Management Events on page 19
Monitoring the Loss of Link Adjacency on page 12
Monitoring Protocol Status on page 13
Configuring Threshold Values for Fault Events in an Action Profile on page 10
Applying an Action Profile on page 10
Setting a Remote Interface into Loopback Mode on page 11
Enabling Remote Loopback Support on the Local Interface on page 15
Example: Configuring IEEE 802.3ah OAM Support on an Interface on page 21
Ethernet Interfaces Feature Guide for Routing Devices
Fault detection is either based on flags or fault event type, length, and values (TLVs)
received in OAM protocol data units (PDUs). Flags that trigger a link fault are:
statement at the
[edit protocols oam ethernet
Copyright © 2016, Juniper Networks, Inc.
hierarchy level: