Traceroute Monitor - Juniper EX9200 Features Manual

Network Management and Monitoring Feature Guide for EX9200 Switches

traceroute monitor

List of Syntax
Syntax
Syntax (QFX Series)
Release Information
Description
Options
154
Syntax on page 154
Syntax (QFX Series) on page 154
traceroute monitor host
<count value>
<inet | inet 6>
<interval seconds>
<no resolve>
<size value>
<source source-address>
<summary>
traceroute monitor host
<count value>
<inet>
<inet6>
<interval seconds>
<no resolve>
<size value>
<source source-address>
<summary>
Command introduced in Junos OS Release 8.0
Command introduced in Junos OS Release 11.1 for the QFX Series.
Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Display live monitoring of each hop in the route that packets take to a specified network
host. Use as a debugging tool to locate points of failure in a network.
host —IP address or name of remote host.
—Number of ping requests, in packets, to send in summary mode. The default
count value
value is .
10
—(Optional) Trace the route belonging to IPv4 or IPv6, respectively.
inet | inet6
—(Optional) Number of seconds to wait before sending ping requests.
interval seconds
The default value is 1 .
—(Optional) Do not attempt to display addresses symbolically.
no resolve
—(Optional) Receive the specified number of bytes for each packet. The range
size value
is through bytes. The default value is
0 65468
source source-address —(Optional) Source address of the outgoing ping packets.
—(Optional) Generate and display a summary of live monitoring of each hop
summary
on the route that packets take to a specified network host.
.
64
Copyright © 2016, Juniper Networks, Inc.