Network Management and Monitoring Feature Guide for EX9200 Switches
collector
Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
70
collector {
ip4/ipv6-address;
udp-port
port-number;
}
[edit protocols sflow]
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Configure a remote collector for sFlow network traffic monitoring. The switch sends
sFlow UDP datagrams to this collector for analysis. You can configure up to four collectors
on the switch. You configure a collector by specifying its IP address and a UDP port.
The remaining statements are explained separately.
The default port is 6343.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Configuring sFlow Technology to Monitor Network Traffic on EX Series
Switches on page 27
Configuring sFlow Technology for Network Monitoring (CLI Procedure) on page 26
Copyright © 2016, Juniper Networks, Inc.