Link-Discovery; Link-Event-Rate - Juniper EX9200 Features Manual

link-discovery

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation

link-event-rate

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
Chapter 5: Configuration Statements: Ethernet OAM Link Fault Management
link-discovery (active | passive);
[edit protocols oam ethernet link-fault-management interface
Statement introduced in Junos OS Release 8.2.
For Ethernet interfaces on EX Series switches, and M320, M120, MX Series, and T Series
routers, specify the discovery mode used for IEEE 802.3ah Operation, Administration,
and Management (OAM) support. The discovery process is triggered automatically when
OAM 802.3ah functionality is enabled on a port. Link monitoring is done when the interface
sends periodic OAM PDUs.
—Passive or active mode. In active mode, the interface discovers and
(active | passive)
monitors the peer on the link if the peer also supports IEEE 802.3ah OAM functionality.
In passive mode, the peer initiates the discovery process. Once the discovery process
is initiated, both sides participate in discovery.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Link Discovery on page 16
link-event-rate {
frame-error count;
frame-period count;
frame-period-summary count;
symbol-period count;
}
[edit protocols oam ethernet link-fault-management action-profile
Statement introduced in Junos OS Release 8.5.
Configure the number of link-fault management events per second.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Threshold Values for Fault Events in an Action Profile on page 10
interface-name]
event]
59