Sample-Rate - Juniper EX9200 Features Manual

sample-rate

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
Copyright © 2016, Juniper Networks, Inc.

sample-rate {

egress number;
ingress number;
}
[edit protocols sflow],
[edit protocols sflow interfaces
Statement introduced in Junos OS Release 9.3 for EX Series switches.
The option number (which immediately followed
options egress number and
switches.
Specify the number of egress or ingress packets out of which one packet is sampled. If
no interface sampling rates are configured, the global sampling rates take effect. If neither
is configured, by default both ingress and egress packet sampling are disabled.
By default, both egress and ingress sampling rates are disabled.
—Value for egress sampling rate.
egress number
Range: 100 through 1,073,741,823
—Value for ingress sampling rate.
ingress number
Range: 100 through 1,073,741,823
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring sFlow Technology for Network Monitoring (CLI Procedure) on page 26
Example: Configuring sFlow Technology to Monitor Network Traffic on EX Series
Switches on page 27
Chapter 6: Configuration Statements: sFlow Technology
interface-name]
sample-rate
ingress number added in Junos OS Release 10.4 for EX Series
) is no longer available and
73