Juniper EX9200 Features Manual page 122

Network Management and Monitoring Feature Guide for EX9200 Switches
Table 8: show interfaces Fast Ethernet Output Fields (continued)
Field Name Field Description
Number of CoS queues configured.
CoS queues
(GigabitEthernet intelligent queuing 2 (IQ2) interfaces only) Number of CoS
Schedulers
schedulers configured.
Hold-times Current interface hold-time up and hold-time down, in milliseconds.
Current address Configured MAC address.
Hardware address Hardware MAC address.
Last flapped Date, time, and how long ago the interface went from down to up. The format
is
Last flapped: year-month-day hour:minute:second:timezone (hour:minute:second
. For example,
ago)
Input rate in bits per second (bps) and packets per second (pps).
Input Rate
Output rate in bps and pps.
Output Rate
Time when the statistics for the interface were last set to zero.
Statistics last
cleared
Number and rate of bytes and packets received and transmitted on the physical
Traffic statistics
interface.
Input bytes
Output bytes
Input packets
Output packets
Gigabit Ethernet and 10-Gigabit Ethernet IQ PICs count the overhead and CRC
bytes.
For Gigabit Ethernet IQ PICs, the input byte counts vary by interface type. For
more information, see Table 31 under the
command.
106
Last flapped: 2002-04-26 10:52:40 PDT (04:33:20 ago).
—Number of bytes received on the interface
—Number of bytes transmitted on the interface.
—Number of packets received on the interface.
—Number of packets transmitted on the interface.
show interfaces (10-Gigabit Ethernet)
Level of Output
detail extensive
extensive
detail extensive
detail extensive
detail extensive
detail extensive
None specified
None specified
detail extensive
detail extensive
Copyright © 2016, Juniper Networks, Inc.
none
none
none
none