Polling-Interval - Juniper EX9200 Features Manual

Network Management and Monitoring Feature Guide for EX9200 Switches

polling-interval

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
72
polling-interval seconds;
[edit protocols sflow],
[edit protocols sflow interfaces
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Configure the interval (in seconds) that the switch waits between port statistics update
messages. Polling refers to the switch gathering various statistics for the network
interfaces configured for sFlow monitoring and exporting the statistics to the configured
sFlow collector.
If no polling interval is configured for a particular interface, the switch waits the number
of seconds that is configured as the polling interval in the global sFlow configuration. If
no polling interval is specified in the global configuration, the switch waits 20 seconds
between messages.
seconds—Number of seconds between port statistics update messages. A value of
(zero) specifies that polling is disabled.
Range: 0 through 3600 seconds
Default: 20 seconds
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring sFlow Technology for Network Monitoring (CLI Procedure) on page 26
Example: Configuring sFlow Technology to Monitor Network Traffic on EX Series
Switches on page 27
interface-name]
Copyright © 2016, Juniper Networks, Inc.
0