Maximum-Hop-Count - Juniper EX3400 Features Manual

maximum-hop-count

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
maximum-hop-count number;
[edit forwarding-options helpers
[edit forwarding-options helpers
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 11.3 for QFX Series switches.
Set the maximum allowed number of hops. This value is compared against the hops field
in the BOOTP request message. BOOTP request messages that have a number in the
hops field that exceeds
maximum-hop-count
maximum-hop-count statement, the default value is four hops.
number —Maximum number of hops for BOOTP request messages.
Range: 1 through 16
Default: 4
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Routers, Switches, and Interfaces as DHCP and BOOTP Relay Agents
Chapter 12: Configuration Statements (DHCP and DHCP Relay)
bootp],
bootp interface (interface-name | interface-group)]
are not forwarded. If you omit the
231