4.3
Start-Up Flowcharts
These flowcharts summarize steps required to start the drive. Use the flowcharts to determine the most appropriate start-up
method for a given application. The charts are quick references to help familiarize the user with start-up procedures.
Note: 1.
Refer to Application Selection on page 87
2. Function availability differs for drive models CIMR-Ao4A0930 and 4A1200.
Flowchart
Subchart
A
–
A-1
A-2
–
A-3
YASKAWA ELECTRIC TOEP C710616 41B YASKAWA AC Drive - A1000 Quick Start Guide
to set up the drive using one of the Application Presets.
Basic start-up procedure and motor tuning
Simple motor setup using V/f mode
High-performance operation using Open Loop Vector or Closed Loop Vector motor control
Setting up the drive to run a permanent magnet (PM) motor
Note: PM motor control modes are not available on 600 V class drives,
CIMR-Ao5oooooo.
Refer to Parameter List on page 175
Objective
4.3 Start-Up Flowcharts
for details.
Page
82
83
84
85
81
4