Three-Phase 400 V Class Drive Models Cimr-Ao4A0038 To 4A0165 - YASKAWA A1000 Technical Manual

u

Three-Phase 400 V Class Drive Models CIMR-Ao4A0038 to 4A0165

Item
CIMR-Ao4A
Maximum Applicable Motor
<1>
Capacity (HP)
Input Current (A)
Rated Voltage
Rated Frequency
Input
Allowable Voltage Fluctuation
Allowable Frequency Fluctuation
Input Power (kVA)
Rated Output Capacity
<4>
(kVA)
Rated Output Current
(A)
Output
Overload Tolerance
Carrier Frequency
Maximum Output Voltage (V)
Maximum Output Frequency (Hz)
<1> The motor capacity (HP) refers to a NEC rated 4-pole motor. The rated output current of the drive output amps should be equal to or greater than
the motor current. Select the appropriate capacity drive if operating the motor continuously above motor nameplate current.
<2> Assumes operation at the rated output current. Input current rating varies depending on the power supply transformer, input reactor, wiring conditions,
and power supply impedance.
<3> DC is not available for UL/CE standards.
<4> Rated motor capacity is calculated with a rated output voltage of 440 V.
<5> Carrier frequency is set to 2 kHz. Current derating is required in order to raise the carrier frequency.
<6> Carrier frequency can be increased to 8 kHz while keeping this current derating. Higher carrier frequency settings require derating.
<7> Carrier frequency can be increased to 5 kHz while keeping this current derating. Higher carrier frequency settings require derating.
YASKAWA ELECTRIC TOEP C710616 41B YASKAWA AC Drive - A1000 Quick Start Guide
Table A.6 Power Ratings Continued (Three-Phase 400 V Class)
0038
ND Rating 25
HD Rating 20
ND Rating 44
<2>
HD Rating 39
ND Rating 46.6
HD Rating 37.5
<5>
29
ND Rating
HD Rating 24
<5>
38
ND Rating
31
HD Rating
<6>
Specification
0044 0058 0072
30 40 50
25-30 25-30 40
52 58 71
44 43 58
Three-phase: 380 to 480 Vac 50/60 Hz/510 to 680 Vdc
-15 to 10%
54.9 53.0 64.9
46.6 39.3 53.0
34 44 55
30 34 48
44 58 72
39 45 60
<6> <6> <6>
ND Rating: 120% of rated output current for 60 s
HD Rating: 150% of rated output current for 60 s
(Derating may be required for applications that start and stop frequently)
User adjustable between 1 and 15 kHz
Three-phase: 380 to 480 V (proportional to input voltage)
400 Hz (user-adjustable)
A.2 Power Ratings
0088 0103 0139
60 75 100
50-60 50-60 75
86 105 142
71 86 105
<3>
±5%
78.6 96.0 130
64.9 78.6 96.0
67 78 106
57 69 85
88 103 139
75 91 112
<6> <6> <6>
User adjustable
between 1 and
0165
125
100
170
142
156
130
126
114
165
150
<7>
10 kHz
A
167