4.4
Start-Up Flowcharts
These flowcharts summarize steps required to start the drive. Use the flowcharts to determine the most appropriate start-up
method for a given application. The charts are quick references to help familiarize the user with start-up procedures.
Note:
Refer to Application Selection on page 124
Flowchart
Subchart
A
–
A-1
–
A-2
YASKAWA ELECTRIC TOEP C710616 45F YASKAWA AC Drive – Z1000 User Manual
to set up the drive using one of the Application Presets.
Basic start-up procedure and motor tuning
Simple motor setup using V/f mode
Setting up the drive to run a permanent magnet (PM) motor
Objective
4.4 Start-Up Flowcharts
Page
120
121
122
119
4