Cimr-Ao2A0110 To 2A0415, 4A0058 To 4A1200 (Ip00 Enclosure) - YASKAWA A1000 Technical Manual

u

CIMR-Ao2A0110 to 2A0415, 4A0058 to 4A1200 (IP00 Enclosure)

n Removing the Terminal Cover
1.
Loosen the screws on the terminal cover, then pull down on the cover.
Note: Drive models CIMR-Ao2A0250 to 2A0415 and CIMR-Ao4A0208 to 4A1200 have three screws on the top of the terminal cover.
CAUTION! Do not completely remove the cover screws, just loosen them. If the cover screws are removed completely, the terminal
cover may fall off causing an injury.
2.
Pull forward on the terminal cover to free it from the drive.
n Reattaching the Terminal Cover
After wiring the terminal board and other devices, double-check connections and reattach the terminal cover.
the Main Circuit Terminal on page 59
<1> Connect the ground wiring first, then the main circuit wiring, and finally the control circuit wiring.
YASKAWA ELECTRIC TOEP C710616 41B YASKAWA AC Drive - A1000 Quick Start Guide
Figure 3.11 Removing the Terminal Cover on an IP00 Enclosure Drive
Figure 3.12 Removing the Terminal Cover on an IP00 Enclosure Drive
and Wiring the Control Circuit Terminal
<1>
Figure 3.13 Reattaching the Terminal Cover on an IP00 Enclosure Drive
3.3 Terminal Cover
Refer to Wiring
on page 64 for details on wiring.
3
45