The flowcharts in this section summarize basic steps required to start-up the drive. Use the flowcharts to determine the most appropriate start-up method
for a given application. The charts are intended as a quick reference to help familiarize the user with start-up procedures.
Adjustments on page 75
and perform all checks to ensure a proper drive start-up.
Flowchart
Subchart
A
A-1
A-2
A-3
-
66
Basic start-up procedure and motor tuning.
Simple motor set-up with Energy Savings or Speed Search using V/f mode.
High-performance operation using Open Loop Vector (OLV) motor control.
Operation with Permanent Magnet (PM) motors.
Set-up of drive using application specific selections.
Objective
Refer to Application Presets on page 70
YASKAWA ELECTRIC SIEP C710606 18A YASKAWA AC Drive – V1000 Technical Manual (Preliminary)
Compact vector control drive.
200 v class, three-phase input: 0.1 to 18.5 kw.
200 v class, single-phase input: 0.1 to 4.0 kw.
400 v class, three-phase input: 0.2 to 18.5 kw (44 pages)
Compact vector control drive.
models: 200 v class, three-phase input: 0.1 to 18.5 kw;
200 v class, single-phase input: 0.1 to 3.7 kw;
400 v class, three-phase input: 0.2 to 18.5 kw (427 pages)
Ac drive-v1000
200 v class, three-phase input: 0.1 to 18.5 kw;
200 v class, single-phase input: 0.1 to 3.7 kw;
400 v class, three-phase input: 0.2 to 18.5 kw (512 pages)