Appendix
Print Log Information
This is a record of the most recent ten jobs that have been printed.
This log can be displayed with the following commands.
• telnet : Use the prnlog command. ⇒ P.81 "Printer status"
Item name
ID
Source
Process
Bytes
Result
6
Time
User Code
Address
Process
Print Start Time
Print End Time
Open Count
Eof Count
Data Size
88
Meaning
Print request ID.
The user name, workstation name or address of the host
that sent the print job.
The type of print command used.
The size of the file in bytes.
Communication result.
• OK
Indicates that the print job was completed correctly.
• NG
Indicates that the print job was not completed normally.
• Canceled
rcp, rsh or lpr print commands were stopped. A problem
occurred with the printing application. This message
doesn't appear when ftp or RPRINTER is used.
The time when the print request was received.
The user name, workstation name or address of the host
that sent the print job.
IP address.
The type of print command used.
The time the print process was started.
The time the print process was completed.
The number of print processes that the application made.
The reception number of file unit.
The number of bytes of received data.
Draft 2000/06/22