Table of Contents
Advertisement
NetWare Configuration
As an context, object names are typed from a lower level object and divid-
ed by a period. For example, if you want to create a print server into NET
under DS, type "NET.DS".
D In the [Print Server Operation Mode] group, click [As Remote Printer].
E In the [Remote Printer No.] box, type the number of the printer.
Important
Use the same number as that of the printer to be created in the print
4
server.
F Click [OK] to close the property sheet.
G After a confirmation dialog box appears, click [OK].
J
On the [NIB] menu, click [Exit] to exit the NIB Setup Tool.
K
From Windows, run NW Admin.
Reference
For more information about NWAdmin, see the documentation that comes
with the NetWare.
L
Create a print queue as follows.
A Select the container object the print queue is located in among those in
the directory tree, and click [Create] on the [Object] menu.
B In the [Class of new object] box, click "Print Queue", and click [OK].
C In the [Print Queue name] box, type the name of the print queue.
D In the [Print Queue Volume] box, click [Browse] button.
E In the [Available objects] box, click the volume in which the print queue is
created, and click [OK].
F After confirming the settings, click [Create].
M
Create a printer as follows.
A Select the container object the printer is located in, and click [Create] in
the [Object] menu.
B In the [Class of new object] box, click "Printer", and click [OK]. When you
are using NetWare 5, click "Printer (Non NDPS)".
C In the [Printer name] box, type the name of the printer.
D Click [Define additional properties] to check a box, and click [Create].
64
Draft 2000/06/22
Advertisement
Chapters
Table of Contents
