Ricoh AFICIO AP306 Setup Manual page 46

Configuring the Printer for the Network
A Press {T} or {U} until the fol-
lowing message appears.
<System Menu>
39.Active PTL. l
B Press {Enter}.
The current setting appears on
the panel display.
<Active PTL.>
3
*All Active
C Press {U} or {T} until the pro-
tocol you want to use appears.
D Press {Enter}.
The actual procedure may differ
depending on the protocol you
use. Follow the appropriate
procedure below.
TCP/IP
NetWare
AppleTalk I V J V K
NetBEUI
E
If you use TCP/IP, you should as-
sign the IP Address to the printer.
Note
To get an IP address for the
printer, contact your network
administrator.
If you use TCP/IP, you should
assign the IP address to the
printer.
A Press {U} or {T} until the fol-
lowing message appears.
<System Menu>
32.IP Address
26
j
j
l
E V F V G V I V J V K
HV I V J V K
I V J V K
j
l
B Press {Enter}.
The current IP address appears
on the panel display.
011.022.033.044
j
C Press {U} or {T} to specify the
leftmost digit of the IP address.
111.022.033.044
j
D Press {Enter}.
The pointer (U) moves to the
next digit as shown.
111.022.033.044
j
Note
You can return the pointer
(U) to the previous (left) digit
by pressing {Escape}.
If you press {Escape} when
the pointer (U) is on the left-
most position, the specified
IP address is reset.
E Press {U} or {T} to specify the
second digit of the IP address.
191.022.033.044
j
F Press {Enter}.
G Repeat steps E and F to spec-
ify the remaining digit of the
IP address.
191.168.015.016
Draft 2000/06/22
jl/#
jl/#
jl/#
jl/#
j