Ricoh AFICIO AP306 Setup Manual page 369

When working as a remote printer
Cannot create service connection
Cannot find rprinter ("print server
name"/"printer number")
Establish a connection with the print
server, "print server name"
No local target for "print server name"
Required file server ("file server name")
not found
Required print server ("print server
name") not found
Unable to attach to print server ("print
server name")
NetBEUI (When the Network Interface Board is started)
Back to default name (<Computer name>) The same computer name is detected on
Print session full
Required computer name (<Computer
name>) is duplicated name
Cannot establish a connection with the
file server. Your request may exceed the
maximum number of connections that
the file server can deal with at a time.
The printer having the number dis-
played on the print server does not exist.
Confirm the number of the printer regis-
tered to the print server.
A connection with the print server has
been established.
Cannot get routing information about
the file server. If a different frame type is
configured from that used on the net-
work, you should select "Auto Select" as
a frame type.
Cannot find the required file server.
Cannot find the print server. Confirm
the name of the print server.
Cannot connect to the print server. The
print server refuses a connection for
some reason. Confirm the configuration
of the print server.
the network. As unable to add computer
name to the suffix, Computer name back
to default name. Configure a new com-
puter name that is unique.
Cannot accept the print session.
The same computer name is detected on
the network. The start job determines the
computer name by adding the computer
name to the suffix (0,1....). Configure a
new computer name that is unique.
Draft 2000/06/22
Message List
6
95