Table of Contents
Advertisement
Status
Changing the color settings
with the printer driver caus-
es a drastic change in print-
out color.
Photograph printing looks
rough.
Color documents are printed
in black and white.
Fine dot pattern does not
print.
Solid areas, lines or text are
shiny or glossy when created
as a mixture of cyan, magen-
ta, yellow.
Black gradation is not natu-
ral.
Thin lines are blurred or
light.
When printing on OHP
transparencies, a sheet of pa-
per is not placed between
printed OHP transparencies.
The page layout has
changed.
Note
If you cannot solve the problem by taking above actions, contact your sales or
service representative.
Possible causes, Descriptions, and Solutions
With the IPDL-C printer driver, do not make radical
changes to the settings on the [Color Setting] tab.
Also note that the sample shown by the printer driver
is intended to show what processes are being applied,
not exactly what your printout will look like.
With the IPDL-C printer driver, select [High Quality] on
the [Print Quality] tab.
Printing from some applications results in a loss of res-
olution.
The printer driver is not set up for color printing. Select
[Color] in the color mode setting with the printer driver.
Some applications normally print color text as black
and white.
Select [Photographic] in the [Dithering:] setting with the
printer driver.
Select [K] in the [Black Text/Graphics:] setting with the
printer driver.
Select [CMY + K] in the [Black Text/Graphics:] setting with
the printer driver.
With the IPDL-C printer driver, select the [CAD] check
box on the [Print Quality] tab.
The size and direction of the paper loaded in the paper
tray are different from those of the OHP transparency.
Load paper of the same size and orientation as the
OHP transparencies in the paper tray.
The "OHP Slip" setting is set to "Off" (⇒ P.83). Change
the setting with operation panel.
The printable area differs from printer to printer. A
document that when printed by another printer fits on
a single page might not fit on one page when printed
by this printer. From the IPDL-C printer driver, check
the [Enlarge Printable Area] on the [MISC.] tab.
Other Printing Problems
Draft 2000/06/22
4
57
Advertisement
Chapters
Table of Contents
