Ricoh AFICIO AP306 Setup Manual page 52

Installing the Printer Driver and Software
Note
Auto Run might not automatically work with certain OS settings. In this case,
launch "INSTTOOL.EXE" located on the CD-ROM root directory.
If you want to cancel Auto Run, press the {SHIFT} key while inserting the CD-
ROM and keep it press until the computer has finished accessing the CD-
ROM.
Clicking [Cancel] during the installation process adopts further installation. If
you do this, restart the computer and then reinstall the printer driver or soft-
ware.
User Codes
User Codes are eight digit codes that allow you to keep track of printing done
under each code. To use this feature, the network administrator should assign
User Codes and inform users of them before they install the printer driver.
4
• With the IPDL-C printer driver, if you want to set a User Code, you must
do it when installing the printer driver.
• With the RICOH-SCRIPT2 printer driver, only [Off] or [On] can be selected.
The numerical value cannot be changed. If [On] is selected, "99999999" is
automatically set as a default. So if you want to distinguish between the
RICOH-SCRIPT2 and IPDL-C printer drivers, set the different User Code
in the IPDL-C printer driver.
• In Windows 95/98, if you want to change the User Code, reinstalling the
printer driver is required.
• In Windows 95/98, changing the printer name makes the User Code inef-
fective. If you want to set the User Code again, reinstalling the printer driv-
er is required.
-Using the Shared Printer on Windows 2000 or Windows NT 4.0 for
Windows 95/98 Client
If you want to share the printer on Windows 2000 or Windows NT 4.0, you must
not install the printer driver using Auto Run. Install the printer driver of Win-
dows 95/98 for an alternate driver.
For more information about installing the printer driver as an alternate driver,
see P.35 "Windows 2000 - Installing the IPDL-C Printer Driver" or P.38 "Windows
NT 4.0 - Installing the IPDL-C Printer Driver".
32
Draft 2000/06/22