Table of Contents
Advertisement
Limitation
This setting is available for only the duplex printer.
Note
You can select long-edge feed or short-edge feed regardless of feed and
print direction.
Advanced
Click to open the [Advanced Options] dialog box. ⇒ P.10 " [Advanced Options]
dialog box"
[Paper/Quality] tab
Tray Selection
• Paper Source
Use this to select the tray from which you want paper to be fed for printing.
The following items are available: [Automatically Select], [Bypass Tray], [Tray
1], [Tray 2] (option) and [Tray 3] (option).
Note
If you cannot select an optional tray even though it is physically in-
stalled on the printer, use [Installable Options] on the [Device Settings] tab
to correctly set up the option.
• Media
Use this to select the paper type as [Plain Paper], [OHP Transparency], [Thick
Paper], [Plain (Duplex Backside)] or [Thick (Duplex Backside)].
Note
Selecting [OHP Transparency] as the paper type automatically adjusts in-
ternal settings to use a color profile specifically for OHP transparencies.
Even though the color profile has been optimized for OHPs, the adjust-
ments are automatic and are not indicated in any of the dialog boxes. In
this case, the "Color Profile" setting in the [Advanced Options] dialog box
is not enabled.
Color
Use this to set the output color. The following items are available: [Black and
White] and [Color].
Advanced
Click to open the [Advanced Options] dialog box. ⇒ P.10 " [Advanced Options]
dialog box"
Using RICOH-SCRIPT2 with Windows 2000
Draft 2000/06/22
1
9
Advertisement
Chapters
Table of Contents
