Ricoh AFICIO AP306 Setup Manual page 239

Document Options
• Mirrored Output
Select this option to print a mirror image of the document by reversing the
horizontal coordinates.
• Negative Output
Select this option to print a negative image, which is produced by replac-
ing the three primary colors with their complementary colors, and by re-
versing black and white.
Note
Using negative image printing to output a color image might produce
unexpected results.
• Send CTRL-D Before Each Job and Send CTRL-D After Each Job
When the printer is connected to the network, select [No] for both [Send
CTRL-D Before Each Job] and [Send CTRL-D After Each Job]
When the printer is connected to the computer via parallel cable, select
[Yes] both for [Send CTRL-D Before Each Job] and [Send CTRL-D After Each Job].
• Halftone Color Adjustment
Use this to adjust the halftone settings.
Printer Features
• Auto Tray Switch
Turning on this setting tells the printer to automatically switch to the other
tray if it has the same paper size as the current tray when paper runs out
while printing.
• Gradation
Use this to set the number of colors used per dot to [Fast] or [Standard].
• Color Mode
Use this to set the output color to [Black and White] or [Color].
• Color Setting
Use this to set the correction method used for the color conversion. The fol-
lowing items are available: [Off]
*5
.
[Super Fine]
*1
No modification to the color setting.
*2
Select this setting to perform CMYK conversion with enhanced saturation and
brightness to print vivid colors.
*3
Select this setting to perform CMYK conversion. The colors printed with this
setting are more vivid than those printed with the [Vivid] setting. All of the
colors in the image, especially the lighter ones, are emphasized.
*4
Select this setting to perform color matching based on the printer's built-in
color rendering dictionaries, and perform CMYK conversion. It makes it pos-
sible to print colors that are close to the displayed colors on the computer
screen.
The color rendering dictionaries refer to the contents selected by the "Color
Profile" setting. This setting is useful when the application and printer driver
do not support the color matching features.
*5
Like the [Fine] setting, the color rendering dictionary is used, however, output
is more vivid. This setting is enabled to make light colors print more vividly.
Using RICOH-SCRIPT2 with Windows NT 4.0
*1 *2
, [Vivid] , [Super Vivid]
*3 *4
, [Fine] and
Draft 2000/06/22
1
17