Table of Contents
Advertisement
Using RICOH-SCRIPT2 with Windows
Installable options
This box shows the options installed in the printer.
When selecting an option inside the upper list of this group, its current setting
appears in the [Change setting for:] box. The following settings are available in
the [Change settings for:] box.
1
For the optional tray unit: [None], [Tray 2], [Tray 3].
For the optional memory unit (VMOption): [32 MB RAM] (only the simplex
printer), [64 MB RAM], [96 MB RAM], [128 MB RAM], [160 MB RAM], [192 MB RAM],
[256 MB RAM].
[PostScript] tab
Use this tab to set the output format of the PostScript files and the data process-
ing method.
On the [PostScript] tab, click [Advanced] to display the [Advanced PostScript Op-
tions] dialog box.
When the printer is connected to the network.
Clear both [Send CTRL+D before job] and [Send CTRL+D after job].
When the printer is connected to the computer via a parallel cable.
Select both [Send CTRL+D before job] and [Send CTRL+D after job]. Also, confirm
that [ASCII data] is selected. If it is not selected, select it.
Reference
For more information about the network, see P.20 "Windows Network Environ-
ment".
For more information about the PostScript headers, see P.21 "Windows Head-
ers".
6
Draft 2000/06/22
Advertisement
Chapters
Table of Contents
