Ricoh AFICIO AP306 Setup Manual page 335

N
Assign print queues to the created printer as follows.
A Click [Assignments], and click [Add] in the [Assignments] group.
B In the [Available objects] box, click the queue created in step L, and click
[OK].
C Click [Configuration], and in the [Printer type] box, select [Parallel] using the
drop-down menu, and then click [Communication].
D Click [Manual load] in the [Communication type] group, and click [OK].
E After confirming the settings, click [OK].
O
Create a print server as follows.
A Select the context specified using the NIB Setup Tool (step I-A), and on
the [Object] menu, click [Create].
B In the [Class of new object] box, click "Print Server", and click [OK]. When
you are using NetWare 5, click "Print Server (Non NDPS)".
C In the [Print Server name] box, type the name of the print server.
Important
Use the same name as that specified using the NIB Setup Tool. (Step H)
D Click [Define additional properties] to check a box, and click [Create].
P
Assign the printer to the created print server as follows.
A Click [Assignments], and click [Add] in the [Assignments] group.
B In the [Available objects] box, click the printer created in step M, and click
[OK].
C After confirming the settings, click [OK].
Q
Turn the printer power off and on.
Note
If the printer works as configured, the name of the print server appears as
an attached user.
Using Pure IP in the NetWare 5 environment
A
Log on to the file server as an Admin or an Admin equivalent.
B
Run the NIB Setup Tool.
Reference
⇒ P.48 "Running the NIB Setup Tool"
C
Click [Property Sheet] and click [OK].
The [Network board list] dialog box appears.
NetWare 4.x, 5 - Advanced Settings
Draft 2000/06/22
4
61