Ricoh AFICIO AP306 Setup Manual page 71

B
Click the [LaserWriter 8] icon.
C
In the [Select a PostScript Printer] list, click the name of the printer you want
to use, and then click [Create].
Note
If your network has multiple zones, click the name of the zone the printer
belongs to in the [AppleTalk Zones] list in the lower left side of the [Chooser]
dialog box.
D
Click the name of the printer, and then click [Select].
Note
Be sure to select the PPD file correctly. If the correct PPD file is not selected,
certain options may not be available.
The PPD file is set up and the LaserWriter 8 icon appears at the left of the
printer name in the list. Next, follow the procedure on P.51 "Setting up op-
tions" to make the option settings, or to close the [Chooser] dialog box.
Setting up options
A
On the Apple menu, select [Chooser].
B
Click the [LaserWriter 8] icon.
C
In the [Select a PostScript Printer] list, click the name of the printer you want
to use, and then click [Setup].
Note
If your network has multiple zones, click the name of the zone the printer
belongs to in the [AppleTalk Zones] list in the lower left side of the [Chooser]
dialog box.
D
Click [Configure].
A list of options appears.
E
Select the option you want to set up and the appropriate settings for it.
Note
If the option you want to set up does not appear, the PPD file has not been
set up correctly. Check the name of the PPD file shown in the dialog box.
Reference
For more information about setting up options, see the "Operating Instruc-
tions" for RICOH-SCRIPT2 included as a PDF file on the CD-ROM.
F
Click [OK].
The list of options closes.
Installing the RICOH-SCRIPT2 Printer Driver
Draft 2000/06/22
4
51