Ricoh AFICIO AP306 Setup Manual page 56

Installing the Printer Driver and Software
K
Click [OK].
A dialog box for selecting the printer model appears.
L
Click the name of the printer you want to install, and then click [Next].
A dialog box for changing the printer name appears.
M
Change the name of the printer if you want, and then click [Next].
N
Click [Next].
O
In the next dialog box asking if you want to print a test page, select [No] and
then click [Next].
A confirmation dialog box appears.
4
Note
Print a test page after completing installation and restarting Windows.
P
Confirm the settings you have set, and then click [Finish].
The installer copies the printer driver files from the CD-ROM to the comput-
er's hard disk.
Note
If the [Digital Signature Not Found] dialog box appears, click [Yes] to continue
the installation.
Q
Set up the options with the printer driver.
Installing the printer driver : network environment
Install the driver by Auto Run in accordance with the steps explained. ⇒ P.33
"Installing by Auto Run"
If you want to share the printer on Windows 2000, you must not install the print-
er driver using Auto Run. In this case, cancel Auto Run and install the printer
driver using [Add Printer Wizard] in the [Printers] window.
Note
During installation by using [Add Printer Wizard], the [Digital Signature Not Found]
dialog box might appears. In this case, click [Yes] to continue the installation.
When prompted for the Windows 95/98 alternate printer driver location, select
the following folder in the CD-ROM.
\DRIVERS\IPDL-C\WIN95_98\DISK1\
36
Draft 2000/06/22