Ricoh AFICIO AP306 Setup Manual page 236

Using RICOH-SCRIPT2 with Windows
Note
You can change this setting by changing the memory setting in [Installable
Options].
1
Halftone
Select the halftone pattern you want to use for printing. The following items
are available: [Use Printer Halftone] and [Use System Halftone].
Note
You can select [Use settings below], but you cannot modify [Screen frequency]
or [Screen angle].
Halftone Setup
You can change the halftone settings.
Form to Tray Assignment
You normally do not need to change this setting.
Note
If the paper tray you want to use is not available here, even though it is
physically installed, use the [Device Settings] tab to make the printer recog-
nize the tray correctly.
Font Substitution Table
Use this to edit the TrueType font substitution table. Under [Font Substitution
Table], the TrueType fonts installed on the computer are displayed. Select the
setting you want to use from [Change Setting] for each TrueType font.
Job Timeout
Use this to set a job timeout period in the range of 0 to 32767 seconds. Setting
the value to 0 turns the job timeout off.
Wait Timeout
Use this to set a wait timeout period in the range of 0 to 32767 seconds. Setting
the value to 0 turns the wait timeout off.
Total Printer Memory
Use this to select the amount of memory actually installed in the printer. The
following items are available: [32 MB] (only the simplex printer), [64 MB], [96
MB], [128 MB], [160 MB], [192 MB] and [256 MB].
Option Tray
Use this to select if the optional tray is installed in the printer. The following
items are available: [None], [Tray 2] and [Tray 3].
14
Draft 2000/06/22