Table of Contents
Advertisement
N
Assign print queues to the created printer as follows.
A From [Print Server Configuration Menu], select [Queues Serviced By Printer].
B Select the printer created in step L.
C Press the {INSERT} key to select a queue serviced by the printer.
Note
You can select more than one queue at a time.
D Follow the instructions on the screen to make other necessary settings.
When you have finished the above steps, confirm that the queues are as-
signed.
O
Press the {ESC} key until "Exit?" appears, and select [Yes] to exit PCON-
SOLE.
P
Start the print server by typing the following from the console of the Net-
Ware Server.
If it is running, restart it after exiting it.
To exit
CAREE: unload pserver
To start
CAREE: load pserver print_server_name
Note
If the printer works as configured, "Waiting for job" appears.
NetWare 3.x - Advanced Settings
Draft 2000/06/22
4
57
Advertisement
Chapters
Table of Contents
